[s-cars] Ecu fault code 1111

[Gabriel Caldwell]

I bet the code is 0000.  A LONG flash preceeds each code so if the code was 0000 then all flashes would be the same length.  1111 would be one LONG flash then 4 short ones.
 
Gabriel Caldwell

	-----Original Message----- 
	From: livinotte at cox.net [mailto:livinotte at cox.net] 
	Sent: Sun 15/08/2004 7:31 PM 
	To: s-car-list at audifans.com 
	Cc: 
	Subject: [s-cars] Ecu fault code 1111
	
	

	Hi guys.
	
	I am currently working a 20vT swap. The motor ran today and registered a 1111 ecu fault code.  This is for the ecu.  I happen to read that this can happen on modified ecu's.  Is this true?  I don't even know if the motor was chipped or not to be honest.  I also registered fault code 2111 but I later realized that it was because I took the codes while the motor was off. 
	
	The oil pressure gauge spikes to 5bar. Which has me worried abit.  I was told that this is normal but I don't want to run the car for too long till I get a mechanical oil pressure tester.
	
	also Is there anyone close to Bristol, RI? If possible I could swap out ecu's and check it out?  As of right now I am blinking out the fault codes but I will be getting vag-com and vag-scope soon.
	
	Thanks for any replies
	
	Cheers
	Josh
	
	_______________________________________________
	S-CAR-List mailing list
	S-CAR-List at audifans.com
	http://www.audifans.com/mailman/listinfo/s-car-list