[s-cars] Happersized Rear Sway Bars(HRSB)

[Kirby Smith]

OK, HRSB fans, having received my bar yesterday, I want to confirm that
I know what the parts are and that none got lost in shipping.

I have a bar (nicely wrapped, thank you) with (also nicely wrapped)
  a pair of heim joints with bolts, locknuts, and washers
  a pair of urethane (I presumae) bushings with
    a pair of U-clamps
    a pair of plates with through holes sized for the U-clamps
    a dollop of grease, presumably to lubricate the bushings
I assume this is the first item on the list below

A pair of ~ 8-inch long plates, each with two threaded holes and two
counterbored holes
Do these compose the "Mounting kit" listed below?

A pair of small quasi-triangular plates with one largish hole each.
Do these compose the "Merican fix" listed below?

There were no directions.  Is assembly obvious once one gets under the
car (mine is a 95, not a 92 or Avant), or are there directions posted
somewhere?  Anyone posted a picture?

Thanks in advance

kirby


CaptMagu at aol.com wrote:
> 
> s-heads
> 
> There has been a ground swell of interest and inquiry from this list as well
> as the AW group. I am therefore, opening up another run of the bars. For those
> of you with Avants and 92 S4s(some 93 Canadians as well) you have the stock
> 17mm bar good for 33lbs of anti-roll. The HRSB has 3 adjustment holes and is
> good for 125, 140, and 155lbs of anti-roll. The bar comes with sized mounting
> brackets and urethane bushings and a set of beefy heim joints. For those of you
> with non-bar cars(the rest of us) there is a mounting kit available that
> allows the mounting of the bar with the provided brackets.
> 
> There is a list of Audi-only pieces that are also required and they cost
> about $20. The weak link of these pieces is a key that allows the heim joint to be
> attached to chassis. Several listers have come up with solutions. Dave
> Dawson, who lives here in Evahboost is ready to offer his for $30. We're calling
> this the Merican fix. So if any of you that already have the bar would like this
> let me know. Here's what it all costs:
> 
> $420-HRSB w/mounting brackets and bushings and heim joints
> $150-mounting kit(not required for Avants and 92 S4s)
> $30-Merican fix
> $20-shipping
> 
> I'm sure you've all heard the testimonials concerning this mod but I'll just
> say that this is the single most effective thing you can do for the turn-in
> and handling of a urS4/6 period. Please e-mail me off list for pics or
> questions. If you have a non-bar cars are planning this mod and funds are an issue, I
> would highly recommend that you buy just the mounting kit and the Mereican fix
> at this time since that piece is the hardest to come by.
> 
> Hap, with no sway in Evahboost, Maguire
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list