[s-cars] Improved Lower RSB Brackets

[John Tilden]

Mike Writes:
I have a '93 with no rear swaybar at all.  Can I use
this kit to attach an HSRB?  If I recall, the HSRBs
are generally available, but the rest of the h/w is
hard to come by.

Mike and All,
This Bracket is designed to replace the OEM bracket, so if you car doesn't
have a pre-existing lower sway bar brackt, then we have a small problem.
I didn't think about the lack of bracket, but I guess it makes sense for
Audi to delete the unused tapped hole in the Bearing Housing.

Solutions: Use the Supplied bracket as a drill jig to drill and tap a hole
for the M8 X 1.25 bolt.
I haven't looked at an undrilled Bearing Housing as my car, a 1995.5 Avant,
came with a stock rear sway bar.

Anyone in Seattle with a non RSB car willing to come over and let me crawl
underneath to see what other options migh be available for the unfortunate
majority of S-4, S-6 drivers who have no OEM supplied rear Sway bar? I could
be convinced to design and fabricate a Bracket for this application if there
is enough interest.

Update: I took the Brackets in for Powder Coating today and they will now be
coated in a metailic silver color. Same cost, so they are no longer Black.
Might look a little cooler in silver.

I will get back to each of you who have indicated an interest individually
with shipping cost to your location as soon as I have finalised the shipping
carton. I anticipate using UPS 3 day so you may look online at UPS to get an
estimate for your shipping cost. Box should be about 2" X 4" X 3" weight
about 1 lb.

John

John Tilden
Tilden Consulting Services
2820 164th Ave N.E.
Bellevue WA 98008
(425) 881-2895 Office
(206) 240-5318 Mobile
j.n.tilden at comcast.net

1995.5 S6 Avant Europa Blue