[s-cars] Improved Lower RSB Brackets

[mlp]

They are different parts.  To avoid confusion, perhaps we should try to find
an alternative name for referring to the par John has fabricated to replace
the OEM pieces that tend to fail with Hap's monster sized rear stabilizer
bar.  From pg ?7, point #3, the Audi OEM parts are ETKA PN# 4A0-511-420 and
4A0-511-420, right & left brackets or clips.

The "Peder-bracket" is a different part altogether.

HTH
mike

>-----Original Message-----
>From: Keith Maddock [mailto:keith.maddock at gmail.com] 
>Sent: Wednesday, August 25, 2004 10:24 PM
>To: djdawson2 at aol.com
>Cc: captmagu at aol.com; mlped at qwest.net; keith at maddock.com; 
>mclaire_us at yahoo.com; j.n.tilden at comcast.net; s-car-list at audifans.com
>Subject: Re: [s-cars] Improved Lower RSB Brackets
>
>
><djdawson2 at aol.com> wrote:
>>  CaptMagu at aol.com writes:
>> 
>> 
>> > John's Improved Lower RSB Brackets(ILRBs) will not allow
>> > someone without a stock sway bar to mount an HRSB.
>> 
>> Actually, it can work... if you drill and tap for the OEM style bolt.
>
>How does that differ / replace / co-exist with the Peder-bracket?
>
>Cheers,
>Keith-confused
>
>