[s-cars] heated seats

[Igor Kessel]

Mark Strangways wrote:
> How did you get solder to stick to ni-chrome wire ?
> Unless they have changed the wire from the 5000 days, solder wasn't 
> sticking to my wires, plus on high for too long can loosen the solder 
> joint and create more resistance, which creates more heat, which creates 
> more resistance... ahh you get the idea.

Mark,
I soldered the blue heating elements in the 5000, 200, S4 and S6. They 
all were made out of some multistrand soldarable wire. I was surprised 
as well, expecting to find a NiCr single strand wire.

In fact the only time I couldn't solder the wire was the temp sensor in 
the Intercooler in my 200TQ. That one I had to spotweld.

-- 
Igor Kessel
two turbo quattros