[s-cars] seat heat r&r

[Tom Mullane]

Ron,

I've done the S and the 200, so from memory:
Remove the plastic trim from both sides.
The seat back is attached at two points on each side.  On the S, there is a
torx head bolt (remove from each side first) and a post with a clip.  I
strongly suggest that you leave the two halves attached by the wires and
just work carefully.  Get some hog ring pliers if you don't have any.

On a side note, I found myself offering to help a few folks with their seats
over the holidays in some sort of heat-a-thon.  Looks like the Tuesday after
Christmas will be the day but I am still negotiating with the wife and
relatives.  My hope is that I can provide experience from my own recent
torture in exchange for some sort of group effort at producing a good
write-up for the S cars with pictures.  Ron, you know the place, let me know
via email if you want to come by.

Tom


Date: Fri, 17 Dec 2004 22:37:55 +0000
From: dooksniffer at comcast.net
Subject: Re: [s-cars] seat heat r&r
To: s-car-list at audifans.com
Message-ID:
	
<121720042237.20429.41C35FC30001030300004FCD22007511509D0A000007029C0501010B
@comcast.net>
	
Content-Type: text/plain

Sorry to waste all the bandwidth (fridays are usually slow anyway).
I think I've found the clips mentioned in the Bentley,  to seperate the
drivers seat from seatback, but I have no idea how to release them without
destroying them.

Ron