[s-cars] Re: [Eibach/Bilstein Upgrade on S6 Avant]
Christopher Gharibo
cgharibo at usa.net
Sat Feb 14 10:14:05 EST 2004
Yes, the rear springs are covered with plastic.
I wish to maintain stock height, so should I use the supplied spacer or not?
Thanks,
Chris
stefan13 at att.net wrote:
> Make sure you have the Avant springs. When Igor and I did mine, we noticed
that the rear springs were different than those for the sedan. They had the
top three windings covered with a plastic sleave, which when fully compressed
acts as a spacer. The additional spacer should NOT be necessary if they gave
you the rights parts. Check the flyer in the box.
>
> The upgrade is not doubt worth the effort.
>
> Stefan
>
This e-mail, including any attachments, may contain information that is
protected by law as privileged and confidential, and is transmitted for the
sole use of the intended recipient. If you are not the intended recipient, you
are hereby notified that any use, dissemination, copying or retention of this
e-mail or the information contained herein is strictly prohibited. If you have
received this e-mail in error, please immediately notify the sender by reply
e-mail or telephone and permanently delete this e-mail and its copies and
prints. Thank
you.
More information about the S-CAR-List
mailing list