[s-cars] RE: tq

[Mihnea Cotet]

Hey P,


450Nm is about 330lb/ft. My own chips make 430Nm (316lb/ft) at 2900 RPM and 
a stock car on the dyno produced 350Nm (257lb/ft) at 3300.

HTH,


Mihnea

At 10:41 5/01/2004 -0500, Krasusky Paul (WQQ2PXK) wrote:



>Mihnea and Miikka traded:
>
> >2) The Horsepower on the MTM Stage 1 is limited by the K-24. The torque is
> >very impressive. MTM has also made it that the chip will be slightly lean
>and
> >conserve fuel while cruising. This chip has essentially set the standard
> >and it
> >is quite easy to modify certain parameters and make it a little less
> >aggressive and smoother if that is what you are looking for.
>
>450Nm at 4000 RPM is very impressive? I find it just too peaky but maybe
>that's just me.....
>
>
>
>
>
>
>Howabout that figure in lb/ft for us metrically challenged?  And is that the
>commonly agreed or verified value?  And it could be just you, I dig the way
>it hits IMmostHO...
>
>-P almost a Jerry's Kid K.
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list