[s-cars] Happersized RSB installation

[brian bilotti]

I hope that works. My concern is that the oe plate
isn't strong enough for that big bar. Remember the oe
one is 17mm and everything else is engineered for that
bar. Oh, btw, my LR plate broke today after I wrote
the first post, that makes 3 I know of.....
bb
--- Lee Levitt <lee at wheelman.com> wrote:
> 
> Brian writes:
> >
> >
> > Lee,
> > Nope, BUT, you better make sure the Heim joints
> are
> > extended at least 1" on both ends or you're going
> to
> > rip your RR CV boot. I also suggest you flip your
> rear
> > subframe bolts upside down because they bandents
> into
> > the RSB bushings. These are both BTDT's by several
> of
> > us. Oh, and another BTW, a couple people have had
> the
> > plates the Heim joints attach to "crack" and had
> to
> > weld them to strengthen them and it looks like my
> LR
> > is about to go so I'm buying another set and
> > reinforcing them.
> 
> On my avant, I didn't need the Heim joints as I
> already had an existing bar.
> 
> Lee
> '95.5 S6 avant
> '96 A6 quattro avant
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list


__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus