[s-cars] am of course

[Kirby Smith]

I forgot to mention that if the leak is at the fitting, then the hose
could be cut behind it, an AN fitting attached, and a suitable hose with
banjo bolt end employed to attach it to the front of the fuel filter.

kirby


bob.rossato at att.net wrote:
> 
> > So is anyone familiar with this area? Is it not possible to
> > replace this braided hose by itself without replacing the
> > entire fuel rail?  If I am stuck replacing the entire rail, is
> > this an opportunity to upgrade to "something better"?
> 
> Unfortunately, on the S6 it's all one piece. The feed line to the fuel rail has a short braided section that is crimped to a tube.  This tube runs all the way to the front of the fuel rail and is brazed to the rail.  On the earlier cars, don't know when it was swiched over, the tube was bolted to the fuel rail with a banjo bolt.
> 
> Bob
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list