[s-cars] Water temperature sender.

Todd Bellwood todd at owensport.com
Thu Jan 15 20:36:07 EST 2004


Replace Multifunction switch on water manifold. It is the guage sender and
is commonly avail for around $20.00. It has four pin connector and is
underneath intake manifold. This will solve erratic temp guage 97-99 times
out of a 100, and is a common failure/repair.

Audi P/N 034 919 369 C  Available at any "euroliterate" parts counter

Todd
----- Original Message ----- 
From: "Trevor rice" <trevorricetemp at hotmail.com>
To: <s-car-list at audifans.com>
Sent: Thursday, January 15, 2004 5:54 PM
Subject: [s-cars] Water temperature sender.


>
> Since i've owned my 92 s4 i've noticed the water gauge works oddly.
>
> Symptom: 1st thing in the morning the gauge reads ok. Once at working temp
> "gauge reads about 1/3rd across its face" some time after that the needle
> drops back to the 1st or 2nd black mark.
>
> I presume this isn't normal. If so i guess there are two possibilities
> either there's a wire short or the temp sender is flaky. Would that be
> right?
>
> If its the sender whats its part number & where is it located?
>
> Cheers
> Trev.
>
> _________________________________________________________________
> Let the new MSN Premium Internet Software make the most of your high-speed
> experience. http://join.msn.com/?pgmarket=en-us&page=byoa/prem&ST=1
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
>



More information about the S-CAR-List mailing list