[s-cars] DIY Writeup on After-Run pump replacement

[tony.curran at sympatico.ca]

Evan,

You may want to get a couple of hose clamps to stop your coolant from emptying out on the floor, but other than that you need a screwdriver to undo the hose clamps. That simple.

Tony
96 S6

> 
> From: "evan at relivmaine.com" <evan at relivmaine.com>
> Date: 2004/07/20 Tue AM 08:21:37 EST
> To: s-car-list at audifans.com
> Subject: [s-cars] DIY Writeup on After-Run pump replacement
> 
> 
> Is there a DIY write-up anywhere to replacing the coolant after-run pump? 
> It looks like it's as simple as removing the clamps, unhooking the hoses,
> getting coolant all over the place, and then reversing the proceedure.  Is
> it that simple??
> 
> -Evan
> 
> --------------------------------------------------------------------
> mail2web - Check your email from the web at
> http://mail2web.com/ .
> 
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>