[s-cars] Looking for Inner Diameter measurement of hose for s tock or RS2 Turbo...

[Mark Pollan]

I got 2.2" (56mm.) using the OD of an RS2 turbo sleeve.  Unfortunately the
battery is dead on my calipers so the measurement is eyeballing the slide
ruler portion.

HTH,

Mark

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of James Murray (QB/EMC)
Sent: Thursday, July 29, 2004 1:38 PM
To: s-car-list at audifans.com
Subject: RE: [s-cars] Looking for Inner Diameter measurement of hose for s
tock or RS2 Turbo...

Looking for MAF to Turbo hose, just to be clear... 

The Turbo inlet diameter of the hose in it's uninstalled state or even
better if you have an RS2 Turbo or Stock K24 measure the outside diameter of
the sleeve should do the trick too. 

Cheers, /Jamu.

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com]On Behalf Of James Murray
(QB/EMC)
Sent: Thursday, July 29, 2004 1:14 PM
To: s-car-list at audifans.com
Subject: [s-cars] Looking for Inner Diameter measurement of hose for
stock or RS2 Turbo...


Anyone have the exact "Inner Diameter" of the stock Turbo or RS2 Turbo hose
handy? I guess it's better to know the diameter of the hose in it's
uninstalled state, and not while it's already installed and expaned... 

If anyone has this handy, rather than having to pry mine off, it would be
appreciated.

Cheers, /Jamu.
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list