[s-cars] door reassembly trick

[Bill Mahoney]

>From "Why Do It Only Once University" aka OhNoU
WRT the various and very ingenious methods of re-fitting the inner door
panels over the interior lock pin/button; I would like to add my own..
having very recently done this ask me how many times:
#1.)  OPEN der window.
Then whilst holding panel in pre-"push into place position" and using
only your fingers as tools, reach through said open window, insert lock
pin into the bottom of the door panel's lock pin shaft, make sure all
foam pieces and fasteners are in position and push into place.  It
should go easily.
Slide door handle into place, screw in the screws, stand back and admire
your geniousness.  
Then disassemble once again to:  
           a.) reattach inner cable fasteners that you forgot.
           b.) retrieve tools left inside.
           c.) reattach the electrical connectors.
           d.) reposition the out of position foam pieces.
           e.) fish out the handle cable that is now unreachable.
Repetition builds confidence!
Cheer's
Bill m