[s-cars] 2Bennett Camber Plate Install - Road Test

[kbogach at comcast.net]

I spoke to Ken from 2Bennett about fitting thier plate on top of the 
plates modded per Igor's spec and he said that they might fit onto studs 
but he doubted that proper adjustment could be done.

Konstantin.

>From: "Fred Munro" <munrof at sympatico.ca>
>
>Hi Jeff;
>
>That was Igor Kessel's excellent camber plate mod - I can't take any credit
>for that!
>
>I installed the 2B plates with the OEM plate studs in the stock hole
>location.
>
>You MAY have a problem installing the 2B plates on a strut with Igor's
>modded plate. Igor's mod moves the entire strut 4 mm to the side by changing
>the location of the strut mounting studs. The 2B plate has a spacer ring
>that is a tight fit between the top mount studs and the inner edge of the
>opening in the top of the strut housing. If the top mount studs are moved 4
>mm to the side relative to the strut housing, the 2B spacer ring may not
>fit.
>
>I was considering changing Igor's mod to correct the right side caster, but
>I think I'll run into the same problem with fitting the 2B plate. I'll take
>a look when I get a chance - maybe this weekend.
>
>HTH
>
>Fred Munro
>'94 S4
>
>  
>