[s-cars] Samco hose clamps

[Kevin Day]

On Mon, Jun 28, 2004 at 08:05:05AM -0400, Harold McComas wrote:
> Now that I am finally ready to order the clamps I lost the S-list post that had all the details about the breeze clamps available from NAPA or  McMaster-Carr. Does anybody have the details or that post, it listed the part numbers and the sizes and quantity needed. Any help would be appreciated.

Below is the set of clamps I ordered.  The table is based on others'
posts to the list.  This covers all of the hoses which are pressurized.  
If I were to do it again I'd order new clamps for non-boost hoses also.  

- Breeze constant torque clamps:
  http://www.partssystems.com/shop/products.html?category_id=CTORQ
	3 x CT- 350 (2.750 - 3.625 / 70 - 92) for 80mm hose
	1 x CT- 300 (2.250 - 3.125 / 57 - 79) for 70mm hose 
	1 x CT- 300 (2.250 - 3.125 / 57 - 79) for 66mm hose
	1 x CT- 250 (1.750 - 2.625 / 45 - 67) for 60mm hose
	1 x CT- 175 (1.000 - 1.875 / 25 - 48) for 35mm hose
	2 x CT-9416 (0.813 - 1.500 / 21 - 38) for 30mm hose
	1 x CT-9412 (0.688 - 1.250 / 17 - 32) for 25mm hose

Thanks to whoever discovered this application for these CT clamps --
they do a great job and are very neat.

-Kevin