[s-cars] 3 Valve Cover gaskets in 2 years

[Bjørn Eirik Ødegård]

On my VC the angled aluminum pipe was loose, seeping a lot of oil. I just glued it back on after cleaning the hell out of it, (some two component plastic padding-type stuff) and the cover has been clean since. 

YMMV..
Bjorn :o)
'92 S4 MTM

>From: RCaro900SS at aol.com
>Subject: Re: [s-cars] 3 Valve Cover gaskets in 2 years
>To: peter_schoettle at shaw.ca, s-car-list at audifans.com
>
>Peter,
>
>I had the same problem, however, it was the 90 degree breather 
>hose at the 
>back of the valve cover. It is right above the area where you 
>are seeing the 
>oil. The oil seeps out where the clamp attaches it to the 
>valve cover. Mine was 
>damaged on the side facing the engine, so I could not see it. 
>I noticed it when 
>I was replacing the valve cover gasket :(
>
>Regards,
>
>Robert
>
>


DISCLAIMER:
This message contains information that may be privileged or confidential and is the property of the Roxar Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorised to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.