[s-cars] POS Source?

[Vincent Frégeac]

>From times to times, the list tends to go a bit crazy about "preventive
maintenance". So, a few facts to keep your wallet a bit thicker:
- Temperature on original POS without original crappy thermal paste:
107F
- Temperature on new POS with new thermal paste: 98F
This was in October, 70F ambient temperature after a 45min drive, engine
still running, measurement made with the calibrated infrared gun we have
at the plant. I've yet to see an electronic component with a recommended
temperature below 160F. So I think adding a heat sink behind the POS is
a bit overkill. Even the thermal paste seems a bit overkill as the low
power loss of the POS seems to be already very well dissipated with a
simple metal to metal contact. We're not talking high power class A
amplifier here, but just a switching device.

My 0.02$

-----Message d'origine-----
De : s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] De la part de Igor Kessel
Envoyé : 10 mars 2004 10:08
À : Mike Sylvester
Cc : Miller, Casey; s-car-list at audifans.com
Objet : Re: [s-cars] POS Source?

Mike Sylvester wrote:
> I just bought one yesterday from The Parts Connection.  It cost me
$199.
> 
> When changing your bad POS I recommend applying new thermally
conductive
> paste to the other POS as well.
> Actually, I recommend this as a preventative maintenance on working
POS.
> I found that the factory past was dried up and it didn't appear that
there
> was good contact between the POS and the bracket.
> 
> These parts are failing long before they should.  However they are not
> manufacturing defects since they would have failed much sooner if that
were
> true.
> It is quite possible that they are overheating.  When I replace mine
> tonight, I also installed a heat sink to the bracket behind each POS.
> http://mysite.verizon.net/vze6ngsr/S6POS.htm
> 
> I should note that I sandblasted the bracket and when I repainted it I
> masked off the contact area of the POS and heatsink.
> The heatsink may be overkill, but it can't hurt.
> 
> Mike Sylvester
> '95 S6 avant w/ POS running cool
> http://mysite.verizon.net/vze6ngsr/index.htm

Mike,
you are a damn GENIUS! Thank you so much for the idea! I have the paste 
and I have a couple of old P-100 processor sinks. And I am just about to

start fusing the coils individually, having recently witnessed Stefan 
flatbed his car only because of the stupid short in one of the coils. 
I'll do everything in one go.

Thx again. The timing of your post couldn't be more perfect.

-- 
Igor Kessel
two turbo quattros
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.594 / Virus Database: 377 - Release Date: 24/02/04
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.594 / Virus Database: 377 - Release Date: 24/02/04