[s-cars] needle bearing source?

[Mihnea Cotet]

Mike, the bearing is made by INA (in South Africa most likely, that's what 
IMO "ZA" stands for) and I guess that if you ask an INA bearings 
distributor for that part number, you should be able to get one. I dunno if 
you will but if you have no luck with INA in the US, let me know and I'll 
see what I can do for you from this side of the pond.

HTH,

Mihnea

At 11:27 20/03/2004 -0500, Mike Sylvester wrote:
>I may have buggered one of the needle bearings in my 3B throttle body when 
>I was taking it apart. (don't ask)
>It is not an orderable part from Audi, only the entire TB.
>It seems that it is a non-standard size.
>ID    10mm
>OD    15mm
>length 15mm
>
>Anyone know of a source to buy this animal?
>
>There is a p/n on it, but I haven't been able to cross it to anything.
>This is what is marked on the bearing:
>  F-210146 INA ZA
>
>Mike Sylvester
>'95 S6 avant
>'83 urq (waiting for its 3B)
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list