[s-cars] Software advice for Coupe/S2 with RS2 Equiped 3B Swap

[todd at owensport.com]

Hello

I'm currently working on a S2 made from a Coupe. I believe the software
needs updated, and its probably leaving 40-60 HP on the table. I was told
it RS2 software but I'm not too sure. Boost is 18psi and dwindles down to
13-14psi as rpm's approach redline. The current RS2 configuration may need
a few things updated to match the new software. May be willing to replace
MAF and/or MAP to match software.

Feel free to offer advice or solicite me directly if you have something to
offer.

Current Setup:

3B Engine and ECU (447 907 404 A)
2.5 Bar MAP Sensor
Software unidentified (Reflashed chips)read as follows
     2.5 bar S251
     2.5 bar S701
RS2 EM & Turbo
RS2 Intercooler
370 CC RC Engineering RS2 Equivalent Injectors
Adjustable FPR (modified Bosch, keeps fuel pressure setting constant above
manifold, not rising rate)
UrS4 MAF
Apexi boost controller ( haven't fiddled with it yet, may toss it after
chip fix)

TIA
Todd Bellwood


--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .