[s-cars] RE: Heats too hot ...too cold

[Mike Platt]

It is fun doing the valve cover gasket. Don't forget
those half moon thingys and to snake it around the
camshaft pulley area. Prolly take you a few trys to
look and see it is seated correctly. Still under a 30
minute job but it aint no merican valve cova gasket
from a chevy that is just a big flat rectangle.

Feel free to polish up the valve cover. Don't forget
that you'll need to remove all the coils with plug
connectors and remember how all those wires went
inside the darned thing. I was going to powdercoat
mine but realized it would be a major project.

Have fun!!

Mike P (with 1 yr old valve cover gasket, not
leaking....I think)


--- Bill Mahoney <wmahoney at disk.com> wrote:
> No Average Joe said~
> "Hell, it's fun looking at the cams/valves every
> once in a while,
> though."
> 
> Some folks just get right to the point huh?
> ..not only that but I could just leave the valve
> cover off as the
> ultimate breather/anti corrosion engine compartment
> set up.
> 
> Or heck, maybe I'll polish/diamond deck/machine turn
> that thing up
> whilst it's off;) ?  
> Awe fogettaboutit.  Just more bling to take care of.
> Bill m
> 
> 
> 


__________________________________
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
http://taxes.yahoo.com/filing.html