Subject: Re: [s-cars] RE: Help with an FM-modulated CD changer install

[Charles Baer]

This is all because I can hear the hi end damage caused by the RF
module that IS currently installed... my drums haven't destroyed my
hearing to the point that I can't hear the difference.

Mike Platt wrote:

>I put a $200 12 disc JVC changer with RF modulator,
>from Crutchfield, in my 1995.5 S6 avant two years ago
>with no problems. I cut open the rear prewired round
>cable and spliced in for switched power and ground.
>The changer is mounted in the factory location with a
>bracket I fabricated. I installed the RF modulator
>under the steering wheel area and wired, poer and
>ground, that into the CD changer output of the factory
>deck. I figured I would use the decks grounds to
>eliminate any noise problems. The switched power from
>the deck also powers down the changer when I turn off
>the factory unit. I mounted the controls with velcro
>on the ashtray. Two years, sounds great. Didn't have
>to fork out like $500 for the factory unit and I'm
>happy with the results.
>  
>