[s-cars] VAG-COM measuring blocks for 4A0-907-551

[FvAMI at aol.com]

In a message dated 5/16/04 5:29:06 PM Pacific Daylight Time, 
scottmunger at cox.net writes:

> Does anyone have a label file for the Ross-Tech VAG-COM that matches with
> the S4/S6 ECU?
> 
> If not that, can anyone verify which blocks are N75, Knock, and
> Requested/Actual boost (if it exists)?  What units are they in?
> 
> The label files are like those listed here:
> http://www.ross-tech.com/vag-com/download/label-files/?M=D
> 
> 

Here is my lbl file - I don't believe the UrS4 Motronics will provide blocks 
for N75, Knock and Boost.
-------------- next part --------------
;
; VAG-COM Measuring Block Labels file.
; Module 1 -- Engine
; 
; for the US 1992-1994 Audi S4 and 1995-1997 S6 2.2l turbo 
;
; ECU p/n  :  4A0-907-551-AA
; Component:  2.2l 
;
; Revison FV020314.1
; created:  Feico van der Laan, 12 June 2001
; Revision: 3/14/2002 Added switch Input values
; please email any comments or corrections: fvami at aol.com
;
; **********************************************************************

; Group 0 labels don't display yet
;0,0,Engine Status
;0,1,ECT	,184-215(85-105C)
;0,2,Load	,20-26	
;0,3,RPM	,77-83(770-830RPM)
;0,4,Idle CV	,121-135
;0,5,Idle 0	,70-125
;0,6,Idle load	,123-137
;0,7,Idle Curve	,41-61
;0,8,O2S	,123-133
;0,9,O2S Adapt	,100-141
;0,10,Ignition	,35-37(8-12 BTDC)
;
1,0,General Engine Data
1,1,,Engine speed
1,2,Coolant Temp
1,3,Oxygen Sensor
1,4,Ignition timing
;
2,0,General Engine Data
2,1,,Engine speed
2,2,Inj. duration,(timing)
2,3,Battery Voltage
2,4,Altitude
;
3,0,Engine Intake
3,1,,Engine speed
3,2,Engine load
3,3,Throttle angle
3,4,Intake Air, Temperature
;
4,0,General Engine Data
4,1,,Engine speed
4,2,Engine load
4,3,Vehicle speed
4,4,Throttle, Idle=00010 
;
5,0,Idle Air Control
5,1,,Engine Speed
5,2,IAC,Zero Point
5,3,IAC,Duty Cycle
5,4,Load Switch, ACOn=00010
;
7,0,Idle Air Control
7,1,IAC,Operating Range
7,2,IAC,Adpatation
7,3,IAC,Curve Control
7,4,IAC,Load Adaption 
;<end of file>