[s-cars] T-belt R&R

[lebakken1 at netzero.com]

Gabriel,

This took all of five minutes. My new "tool" will find a home in the toolbox reserved for tools used every couple of years. Right next to the piece of PVC pipe end that works magnificently as a crankshaft seal press.

-- "Gabriel Caldwell" <gabriel at ts.bc.ca> wrote:
Wow that's crazy!  I just rested mine on an old cardboard box.

Gabriel Caldwell

-----Original Message-----
From: lebakken1 at netzero.com [mailto:lebakken1 at netzero.com] 
Sent: May 24, 2004 1:49 PM
To: Douglas.Fifield at TENNANTCO.com
Cc: lebakken1 at netzero.com; s-car-list at audifans.com
Subject: RE: [s-cars] T-belt R&R

Au contraire.

Not only has it been moved the requisite several inches forward on the
right (pass.) side, it is being held in place with a super high tech
holding fixture:

8" piece of 1 x 2 cedar, with about a 3/8" hole drilled 1" from the end;
1.5" diameter fender washer
3/8" x 1" Lag bolt threaded through, leaving .1" clearance between
washer and wood.

Apply to R/H radiator mount and tighten.

Works well.

Craig Lebakken
94 S4

Craig Lebakken
94 S4

Please note: message attached