[s-cars] Afterrun not working...

[Kevin Day]

On Sat, Oct 09, 2004 at 07:14:47PM -0400, Nick Stuart wrote:
> Hello fellow listers. I've just realized that my afterrun isn't
> running at all. The pump, nor the fan is coming on. What are the
> common symptoms of this? Simple blown fuse? Bad thermostat somewhere?
> I just took a quick look at the SJM site and it appears the sensor's
> in a kinda tight spot. Any  btdt with this guy?

The sensor (next to the infamous "MFTS")  is actually quite easy to 
replace; with a couple of extensions and a U-joint you can get in 
there without removing anything else.  Very little coolant will come 
out when you swap them.  

Before replacing it, just disconnect the connector and short the two
terminals.  If the fan comes on, then you have your culprit; if not, 
the problem is elsewhere.  

-Kevin