[s-cars] RS2 MAF

[FvAMI at aol.com]

In a message dated 10/12/04 7:42:57 PM Pacific Daylight Time, 
strangconst at rogers.com writes:


> Can someone PLEASE, Pretty PLEASE give me the bosch part number off the top 
> of an RS2 MAF ?
> 
> I want to try a local Bosch dealer to see if and at what exorbitant price 
> they can get an RS2 Maf for .
> 
> Thanks much y'all.
> 
> Mark //S
> 

The outputs are similar if not identical for a stock MAF and a RS2 MAF at 
least below 4.5 volts (limit of the test equipment). Trevor flow benched it and I 
have seen his incredible setup and the actual data he accumulated ... 
considering his ME background and the precise nature and amount of data he took 
measuring flow rate and output voltage ... I can't see any significant differences 
in output.

Also for what it is worth I have tested the RS2 Rev B software with the ADU 
resistor Motronics change and have no issues at all using this software with 
the standard MAF.

Best regards,
Feico van der Laan