[s-cars] S6 Serpentine belt

[Rokas Reipa]

FWIW, the continental belt that I put on when I did my timing belt
wasn't exactly the right model(the grooves were too shallow even
though the length was right) and it developed a nasty squeak about two
weeks later. I replaced it with a Gates branded belt which had much
deeper grooves and it has been quiet ever since. Not to bash Conti
belts or anything but make sure that the model you have is the right
one for the car. Like Gabriel said, the replacement is easy.

Rokas
95.5 S6


On Fri, 22 Oct 2004 13:16:48 -0700, Gabriel Caldwell <gabriel at ts.bc.ca> wrote:
> IIRC that one is fairly easy.  Just release the tension on the belt
> tensioner and slide a new one on.  I did this all together with my
> timing belt job, but doing just the serp belt should be really easy.
> 
> Gabriel Caldwell
> 
> 
> 
> 
> -----Original Message-----
> From: DGraber460 at aol.com [mailto:DGraber460 at aol.com]
> Sent: October 22, 2004 11:48 AM
> To: s-car-list at audifans.com
> Subject: [s-cars] S6 Serpentine belt
> 
> I tried the SJM site, and can't find what I used to for "process"  info.
> Anyone have any advice for an S6 serpentine belt replacement?
> 
> Dennis
> Denver
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>