[s-cars] Kill Switch

[Bluemaxww1 at aol.com]

Just in general, as I don't have an S6.  Splice into the starter wire  off 
the ignition switch.  Install a 4 prong relay.  Run the switch for  the relay to 
anywhere it would be convenient, out of site, and you don't have to  be a 
contortionist to get to. The wire for the switch can be as long as you  want. You 
can use the smallest switch, push button, lever, or rocker you  want.  All 
the switch does is turn the relay on or off, it does not carry  the current for 
the starter.  I have them in all my cars.  Some of the  cars have two.  You 
can also set it up to break the main power feed to the  ignition switch.  Better 
than alarms.
 
Greg
 
In a message dated 9/3/04 7:13:53 AM Pacific Daylight Time,  
donald.smith2 at bell.ca writes:

Hi:
I  am a new lister, long time reader.
I have a 95.5 S6 in my driveway and am  slowly discovering how amazing
these cars really are.
My insurance  company is insisting I put in a kill switch.Has anybody
done a clean job,  and if so, which wires do I have to splice into? I do
not yet have a Robert  Bentley manual.

TIA
Don