[s-cars] POS Question

[motogo1]

If you swapped the POS and it was still cyl. 3, the POS is not the problem.
Problem should have moved to a different cylinder.

Gary Martin
94 UrS4
91 200 TQA

----- Original Message ----- 
From: <riff944 at cox.net>
To: <s-car-list at audifans.com>
Sent: Saturday, September 18, 2004 12:07 PM
Subject: [s-cars] POS Question


> H All-
>
> My car developed a miss yesterday.  Followed the instructions on SJM
Autotechnik on trouble shooting the POS and found it was cylinder #3. Well
after changing the POS side to side I still have the problem.  Looks like I
am due for a new POS.
>
> Questions I have is that I also pulled the plug boots to see them.  On #3
there was a white mark that looked like residue from it arcing to the head
at the coil.  Picture available here:
>
> http://forums.rennlist.com/upload/plug_boot_sm.jpg
>
> Could the boot be bad and cause the POS failure?  I would hate to buy a
new POS and have this happen again if it is the boot's fault.
>
> Also is it very bad to drive the car with the miss?  I will order the
parts today, but probably won't get them until mid-week for install.  Would
I be doing damage to the car to continue driving it?
>
> Thanks,
> Riff
>
> '95 S6
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list