[s-cars] Pressure bleeder question

[Steve Powers]

Other than a bit of fluid coming out when you detach it, mine doesn't
leak. Wrap a shop towel around the reservoir when you remove it and
you will easily clean this up.

Steve

On 4/20/05, Mike Claire <mike.claire at gmail.com> wrote:
> I just got a Motive pressure bleeder.  Kind of looks like a garden
> sprayer except the end of the hose has a cap that screws onto the top
> of the brake fluid reservoir.
> 
> I was just wondering, if you go putting a lot of pressure into the
> system from the top of the reservoir, isn't the weak link going to be
> the friction fitting where the blue woven hose plugs into the clutch
> master cylinder?  Can that fitting really take 15 or 30 lbs pressure
> without blowing off?  Thoughts of spraying a pint of brake fluid all
> over the inside of my car have me wondering....
> 
> Mike
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>