[s-cars] Injector insert sealant?

[Steve Powers]

that's what I was wondering. I have also heard that soaking the
o-rings in a bit of gasoline overnight will help them seal. it can't
hurt them.

Steve

On 4/25/05, Mark Strangways <Strangconst at rogers.com> wrote:
> Well, Umm...
> 
> I have had my injectors in and out about 100 times last year. The only thing
> I used was some dielectric grease to ease the o-ring in..
> 
> You have the o-ring on the injectors right  ?
> 
> Mark
> ----- Original Message -----
> From: "Stacy Mohr" <samsims at ulmail.net>
> To: <s-car-list at audifans.com>
> Sent: Monday, April 25, 2005 4:26 PM
> Subject: [s-cars] Injector insert sealant?
> 
> > Can someone tell me which sealant to use on the injector inserts (aan).
> > I have tried teflon tape, toctite 565, and now permaseal gasket maker.
> > I would have tried rtv but that is not suitable with fuel.  Nothing
> > seals it, nothing is strong enough to hold pressure.  The bentley says
> > nothing about them.  Please help before I JB weld them in!
> >
> >
> > Thanks
> > Stacy
> >
> >
> > _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com
> > http://www.audifans.com/mailman/listinfo/s-car-list
> >
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>