[s-cars] Turbo question Was: Clamps for Samco hoses

Ivan Demkovitch idemkovitch at hotmail.com
Mon Aug 1 09:13:37 EDT 2005


Got clamps from NAPA. They had them only in one store - came out for ~$30 
for everything. (I did not buy small ones - had good ones in my garage 
already)

Samcos are on. I also checked coils using spark tester. They are all about 
the same. If there is a difference between coils - very small.
Car seem to be running fine. Ready for 3 bar chip :)

Using Fred Munro write-up on hoses install - I decided to "check turbo 
impeller while I'm there" Everything seem to be tight. No play in a shaft. 
But if you press on a shaft sidewaus - you can move it. It feels like it's 
on a spring. You can move it sideways and than it comes back. Is that the 
way it shoould be or it is a play and turbo will be going bad? I also 
noticed oil on a turbo around air intake port.

>From: TMULLANE at snet.net
>To: idemkovitch at hotmail.com
>CC: s-car-list at audifans.com
>Subject: RE:  [s-cars] Clamps for Samco hoses (yep, again :) )
>Date: Wed, 20 Jul 2005 12:20:47 -0500
>
>Ivan,
>
>NAPA still carries the clamps, but they do not show
>up on their website.  I've been buying a ton of them
>for the FMIC kits.
>
>Tom
>
>Date: Wed, 20 Jul 2005 09:46:49 -0500
>From: "Ivan Demkovitch" <idemkovitch at hotmail.com>
>Subject: [s-cars] Clamps for Samco hoses (yep,
>again :) )
>To: s-car-list at audifans.com
>Message-ID: <BAY104-
>F611BE4CBCB3793459FD2EAED70 at phx.gbl>
>Content-Type: text/plain; format=flowed
>
>Folks,
>
>Thinking about clamps - can't decide.
>Napa doesn't seem to carry constant torque clamps
>anymore (at least their
>search does not work for those numbers) Breeze
>support sent me to McMaster
>as their distributor.
>
>http://www.audifans.com/pipermail/s-car-list/2004-
>February/025772.html
>
>So, I'm thinking between 2 choices:
>1. Breeze clamps - which will cost me ~$50 from
>McMaster
>or
>2. Constant torque clamps from ECS Tuning ~$50
>
>last ones does not look "fancy", but may be they work
>better?
>
>Would like to hear opinions.
>I'm going to reprogram ECU for 3bar and don't like
>idea about hoses slipping
>off
>
>Thanks,
>Ivan
>93' S4
>
>




More information about the S-CAR-List mailing list