[s-cars] Clamps for Samco hoses

[Robert Rossato]

FWIW, for the small clamps I didn't bother with the Breeze constant
torque clamps, mainly because the spring loaded bolt gets kind of bulky
on the smaller sizes.  Instead I went with a couple of different clamps
sourced from McMaster-Carr (www.mcmaster.com).  P/Ns 45945K66 & 5462K48.
The plug load on the smaller fittings is a lot smaller and the constant
torque clamps seemed overkill.  My main concern was in getting a non
perforated clamp to prevent extrusion of the silicone hose.

Bob

> -----Original Message-----
> From: s-car-list-bounces+r0ssat0_987=att.net at audifans.com 
> [mailto:s-car-list-bounces+r0ssat0_987=att.net at audifans.com] 
> On Behalf Of Robert Rossato
> Sent: Tuesday, August 02, 2005 6:54 AM
> To: 'Greg Johnson'; s-car-list at audifans.com
> Subject: Re: [s-cars] Clamps for Samco hoses
> 
> 
> I have one of the boxes lying around and it has part number 
> 705-1509, HD
> Hose Clamp 2 3/4 to 3 5/8.  I think that corresponds to the Breeze
> CT350.  Don't recall what the other part number is but they should at
> least be able to get to the right catalog with that.
> 
> Bob
> 
> > -----Original Message-----
> > From: s-car-list-bounces at audifans.com 
> > [mailto:s-car-list-bounces at audifans.com] On Behalf Of Greg Johnson
> > Sent: Monday, August 01, 2005 10:18 PM
> > To: Ivan Demkovitch; s-car-list at audifans.com
> > Subject: [s-cars] Clamps for Samco hoses
> > 
> > 
> > If anyone has the NAPA part numbers I'd appreciate them.  They NAPA
> > guys I spoke to last week could find nothing in their catalogs.
> > 
> > Greg J
> > BIRA.ORG
> > 
> > "Ivan Demkovitch" <idemkovitch at hotmail.com> wrote:
> > 
> > >Got clamps from NAPA. They had them only in one store - came 
> > out for ~$30
> > >for everything. (I did not buy small ones - had good ones in 
> > my garage
> > >already)
>