[s-cars] Bilzcatz big brake brackets

Tue Aug 16 09:10:21 EDT 2005

He made me a set for my '95 S6 to match up to 996 calipers (actually Boxster S version) and euro A8 rotors.  Took a few weeks, but the quality is outstanding.

I also bought stainless lines from him.  

The bolts that bolt the bracket to the caliper were a little too long and I emailed him and he replied within like 5 mins that he had changed his design slightly and sent me old bolts and offered to send me a replacement set or pay me to get them myself.  Luckily I found a supplier to a friend who was local who had 20,000 in stock and got them for free.  (So in the process I found an excellent resource for metric fasteners.)  Note that I was not actually expecting him to send me any of the bolts in the first place so I wasn't upset. 

BTW (If I can hijack the thread) - I know that I have to swap the vent tubes with the bleeder fittings since the UrS car has calipers located in the leading position instead of trailing position like the porsche.  But do I also have to install the left porsche caliper on the right side of the UrS and vise versa for the other side due to piston sizes or something?

Dave
'95 S6

-----Original Message-----
From: Keith Maddock <keith.maddock at gmail.com>
To: S-cars mailing list <s-car-list at audifans.com>
Sent: Tue, 16 Aug 2005 00:09:08 -0400
Subject: [s-cars] Bilzcatz big brake brackets

A friend is considering purchasing a Bilzcatz (sp??) big brake kit -
anyone have any experience with these?

Actually looks like they don't really sell a kit unless you beg, they
just sell the bracket (BIRA style without the membership, etc).

http://www.billzcat1.com/Brakes/oemhd.html
http://www.billzcat1.com/Brakes/tailgater.html

Thanks,
Keith
-- 
------
PGP Key: http://keith.maddock.com/pgpkey.html
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list