[s-cars] Bilzcatz big brake brackets

[hoog23@aol.com]

Thanks Taka - I beleive that Bilzcat can supply those as well.
 
-----Original Message-----
From: Taka Mizutani <t44tqtro at gmail.com>
To: hoog23 at aol.com <hoog23 at aol.com>
Cc: keith at maddock.com; s-car-list at audifans.com
Sent: Tue, 16 Aug 2005 10:42:28 -0400
Subject: Re: [s-cars] Bilzcatz big brake brackets


Dave-
You need to have the smaller pistons to hit the pad first- if your
calipers are not oriented correctly, you need to mount the left one on
the right side of your car and vice versa.

If you do this, you have to swap the crossover tubes- make sure you
use a good-fitting flare nut wrench, it would be bad to round off the
nuts.

Does anyone know of a good source of 2-piece replica rotors? I know
Girodisc does OEM replicas in 2-piece, as well as an Australian
outfit. I want to reduce unsprung weight.

Taka