[s-cars] ARGH!! Stalling at idle

[RM]

If you are getting an idle adaption code, then the problem is quite possibly 
in the throttle valve area. Remove the intake boot and check to see if there 
is any build-up in the throttle bores and plates. If so, a healthy dose of 
carb cleaner and a tooth brush will do the trick. Then disconnect the 
battery and jumper both batteyr leads together for a good hour, or better 
yet, overnight. This saps all memory from all control modules and allows 
them to start from fresh. Reconnect the battery and see if the problem goes 
away. It may take a drive cycle or two for everything to come back online in 
a correct fashion. If you still have the problem, you may have an input 
issue to the ICV, a vacuum leak or a faulty CTS. Get back to me with the 
results.

Rolf Mair
waves at epix.net

94 UrS4
90 20v turbo 90q
69 camaro conv.
02 Allroad (wifes)



-- 
Internal Virus Database is out-of-date.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.6 - Release Date: 2/7/2005