[s-cars] exhaust hardware - stromung downpipe install

[Sean Douglas]

I have an Excel spreadsheet with all the part numbers required to do a
RS2 swap.

Sean

> -----Original Message-----
> From: Rich Beebe [mailto:rich at beebecomm.com] 
> Sent: Tuesday, February 15, 2005 10:31 AM
> To: Sean Douglas; audi s-cars list
> Subject: Re: [s-cars] exhaust hardware - stromung downpipe install
> 
> 
> thanks again, sean. just what i needed.
> 
> did i miss where this was listed, by chance?
> 
> rich
> 
> > From: "Sean Douglas" <quattro20v at telus.net>
>  
> > Rich:
> > 
> > flex pipe > downpipe, N 010 244 16, 8mm x 30mm bolt x3
> > flex pipe > downpipe, N 900 850 01, 8mm nut x3
> > flex pipe > wastegate, N 902 002 01, 8mm nut x3
> > 
> > Not sure why there is a different part number for the 8 mm 
> nuts, but I 
> > know one of them is the locking type.
> > 
> > Sean Douglas
> > 1997 Audi S6//RS2-spec
> > 1990 Audi 90 quattro 20v
> > 
> > 
> >> -----Original Message-----
> >> From: s-car-list-bounces at audifans.com 
> >> [mailto:s-car-list-bounces at audifans.com] On Behalf Of Rich Beebe
> >> Sent: Tuesday, February 15, 2005 9:21 AM
> >> To: audi s-cars list
> >> Subject: [s-cars] exhaust hardware - stromung downpipe install
> >> 
> >> 
> >> does anyone know what the size/dimensions of the bolts and nuts on 
> >> the wastegate side of the exhaust are? mine definitely need 
> >> replacement and i haven't found them spec'd anywhere. i 
> need the nuts 
> >> and bolts on the lower accordian connection and the nuts on the 
> >> upper. thanks.
> >> 
> >> rich
>