[s-cars] Crank Bolt From Hell (lessons learned)

[DGraber460 at aol.com]

In a message dated 1/3/2005 3:36:41 P.M. Mountain Standard Time,  
russell.s.southerlin at lmco.com writes:

Yes I  was going to go OEM on the pully.  About $70 is the best price I
have  found from SJM.

Anyone have their Family Album handy and want to look  up the crank bolt
P/N?
I am out of town and don't have the access to  mine.


Russ


-----Original Message-----
From:  Mtgadbois at aol.com [mailto:Mtgadbois at aol.com]
Sent: Sunday, January 02, 2005  8:33 PM
To: Southerlin, Russell S
Cc:  s-car-list at audifans.com
Subject: [s-cars] Crank Bolt From Hell (lessons  learned)



Russ wrote:

Anyone know a good source for a  crank pulley?

Answer:   It was highly recommended to me to  get one from the dealer.  I
didn't listen I got one from Shokan's -  but its worked out just fine so
far.  Also carefully check the four  bolts holding the harmonic balancer.
Last summer a failure with one or more  bolts caused me to do a top end
job - actually a  nice summer  diversion but could be hell if that's your
only car or you do it in cold  weather.   Regarding the balancer tool
3056? its great - borrow  one.

Mark near Chicago sobering up for  tomorrow.


_______________________________________________
S-CAR-List  mailing  list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list



The family album shows 034 105 229 A for a 95 S6. I would have guessed a 91  
200 would be the same but it isn't. It shows N 010 143 2 (M18x1  5x65).
Don't know if that helps or confuses, but hope the first. 
 
Dennis
Denver