[s-cars] Center Taillight sealant

[Tom Green]

Thanks, Scott.

I had just wanted to touch some of the butyl before making a decision 
since I may want to take the cover off sometime.  Now, a trip south 
(while you are all playing
in the snow) has interrupted this project.

Tom '95 S6

On Jan 11, 2005, at 12:30 PM, QSHIPQ at aol.com wrote:

> Since NAPA supplies many of the body shops country wide, you will find 
> any of these 3M sticky items at the local depot (read: 1 day away).  
> They also make a really wide (3in) ribbon that works great as a sound 
> deadener.
>
> HTH
>
> Scott Justusson
> QSHIPQ Performance Tuning
> Chicago
> In a message dated 1/11/2005 12:01:34 PM Eastern Standard Time, Tom 
> Green <trgreen at comcast.net> writes:
>
>> Thanks for the help.  The local NAPA lists all this sealant, but only
>> had the 08578 caulk ribbons in stock.
>>
>> Tom '95 S6
>>
>> On Jan 10, 2005, at 12:48 PM, Harold McComas wrote:
>>
>>> Tom, I went to the basement to find what I used. It was 3M 
>>> window-weld
>>> ribbon sealer, part # 08610, 1/4" X 15', round bead. Like I said the
>>> diameter was too small go I would go with 08611or 08612 (BTW, the
>>> 08621 is the bulk pack version with 24 rolls per case).
>>>
>>> Harold
>>> '96 S6
>>
>> _______________________________________________
>> S-CAR-List mailing list
>> S-CAR-List at audifans.com
>> http://www.audifans.com/mailman/listinfo/s-car-list
>>
>