[s-cars] APIKOL short shifter opinions

[Emre Washburn]

To Hap,

The BillzCat1 unit MAY shorten the shaft, but this would only be to
return it to a stock height AFTER raising the pivot point, which would
raise a stock shift rod up AND shorten the throw. Repeat, this is NOT
just a shortened shaft! I still do not understand where you came up
with the idea that the kit would just be a shortened rod? That's
nutty!

To James,

>From what Richard Hoffman (BillzCat1) has said, both kits coupled work
together for "Happershortned" throws. The image you posted was the
original piece, before mos of the work was done to it.

To Mr. Dawson,

The kit you saw that was sent to Paul was the first version, which was
found that when installed would not work, as it hit a piece of trim.
Measurements were taken, and a revision was made.


-- 
Emre
92 //S4
90 Cq
40 valves to many!


On Wed, 12 Jan 2005 17:16:49 EST, CaptMagu at aol.com <CaptMagu at aol.com> wrote:
> Yummy
> 
> So, I said, "the Billzcat shortens the shaft". Should I have said, "the
> Billzcat is a shorter shaft"? I don't know where you're coming from? Seems
> like you have an attitude that just won't quit. BTW, you're picture does not
> look very sexy to me. Of course, that's just my opinion.
> 
> Hap, wit dakine opinions fron Evahboost, Maguire