[s-cars] Help!! Evil drain plug will NOT come out

[Robert Myers]

BFPW - a large pipe wrench.  Be sure the Fumoto valve is the right 
one.  You need something like a 22 mm thread on it.  It's the largest 
diameter thread they make for the valves.

At 09:32 PM 1/15/2005 -0500, Edward wrote:

>I just spent 4 hours trying to get the oil drain plug out... hoping
>there's some list wisdom on this one.  It will not BUDGE.  Ironically,
>I was trying to install my shiny new Fumoto valve.
>
>So the plug wasn't rounded when I started, but it was TIGHT.  In
>trying to lever onto it with ridiculous force it slipped off the bolt
>a couple times.  Eventually it wouldn't hold, so I started at it with
>vice grips and hammer.  This had worked last time it got stuck.  No
>luck.  I've been soaking it for a few days in break-away.  Still no
>love.  Today ground a groove in it to use my hand impact driver and
>X-Plug socket.  STILL won't budge.  I used a little heat, but didn't
>know the wisdom of torching the oil pan. Is this cool?  I had images
>of oil catching fire inside the pan.
>
>Any ideas on how to get this stubborn bolt out?  It's driving me crazy.
>
>Thanks!
>
>Ed
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.0.300 / Virus Database: 265.6.12 - Release Date: 1/14/2005

Bob
Random Bushism: "We're concerned about AIDS inside our White House - make 
no mistake about it." George W. Bush, Feb. 7, 2001
_____
Robert Myers
Fayetteville
'95 urS6 - Cashmere Grey
_____