[s-cars] Wheel spacers?

[Evan Levine]

I'm running those same wheels on my 93 S4, used a 10mm H&R spacer to
push it back out to the proper offset. Been running this way well over
a year now with no regrets.

H&R isn't the ONLY name, but they aren't too expensive, and you do NOT
want to run a crappy spacer. Make sure you get good ones, make sure
they are hubcentric. Don't forget that with spacers you need longer
wheel bolts as well.


On Wed, 26 Jan 2005 11:18:03 -0800, Jeremy Ward
<jward at mti-interactive.com> wrote:
> Hey guys.  I was wondering if any of you have had experience with
> running wheel spacers on your cars.  I am picking up a set of Avus
> 17x7.5 ET45 wheels from my buddy, but they look a little goofy on my V8
> which calls for ET35 as the 7.5" width wheel.  I was thinking of pushing
> them out a 'little extra' (10mm spacer would put them in the factory
> location).  Any experience?  H&R the only name in spacers?  Know of any
> smoking deals on 2 spacers and 20 ball-seated lug bolts?
> 
> Thanks in advance,
> 
> - Jeremy
> http://198.107.18.114/v8q/
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>