[s-cars] Re: Coils and PSO's

Dave Forgie forgied at direct.ca
Fri Jun 3 10:02:06 EDT 2005


Christopher and Mike:  I have been posting all over on Audi World (B5
and B6 A4's 1.8t, 2.7t) and VW Vortex (Golf/Jetta IV, B5 and B6) forums
asking for information about the pin outs on the "115 L" 1.8 t coil
pack.  This is the one with the built in POS.  It has four pins (as
opposed to our coils).  Nothing yet.  A friend is bringing a Jetta IV
Bentley to work so I can have a look at it.  I think this has the
potential to be a winner.

The four pin connectors are available from the dealers.  Not cheap but
available.  If this goes, it may be wise to develop a DIY instructions
AND a GP on the connectors and/or the coil packs.  I bought one for
CDN$40 taxes in so the price is VERY reasonalb.e

Christopher Leal wrote:

> Hey guys, I've got a set of these coils and can try this out. The
> biggest cost reduction here is that they replace the POS and the coil.
> Not sure of the longevity of these since there were a few recalls on
> them but the sure would be cheap. Check back with me as I may find
> time this weekend to try this out for shits and
> giggles. Christopher ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 29 May 2005 21:54:13 -0600
> From: "mlp" <mlped at qwest.net>
> Subject: RE: [s-cars] Coil Replacement Options?
> To: "'Dave Forgie'" <forgied at direct.ca>, "'s-cars'"
> <s-car-list at audifans.com>
> Message-ID: <000101c564cb$3ee26410$0200a8c0 at mpd530>
> Content-Type: text/plain; charset="us-ascii"
>
> I don't know the answer re the 1.8 /or 2.7 tt Audi coils, but I'm told
>
> FWIW
> that some, at least one or more persons have been looking at a GM
> product
> (the Corvette) coils as possible replacements.  This would entail
> substituting spark plug wires for the plug boots, and remotely
> locating
> the
> replacement coils else wheres in the engine compartment, as opposed to
>
> in
> the head where they tend to get, and stay pretty hot.
>
> No word on when, if ever this proposed solution may actually be
> implemented.
> But I am, as we speak, sitting with one car without a good set of
> coils
> waiting for an answer.
>
> HTH
> Mike
>
> >-----Original Message-----
> >From: s-car-list- On Behalf Of Dave Forgie
>
> >S-gruppees:  I have posted this same question at least once
> >before.  The question is whether it would be possible (and
> >cheaper (??)) to replace our coils with those from say a 2.7tt
> >or 1.8t.
>
>
> >Dave F.
> >


More information about the S-CAR-List mailing list