[s-cars] wastegate cap removal

[captmagu at aol.com]

Dookster

Be careful here as there is some compressed energy with the spring in 
there. The cap hangs up on the studs that you undid the bolts from. 
Wiggle it around and tap it with said mallet and it should shake free. 
You might want to have a hand pushing against the spring until it 
breaks free.

Hap, wit dakine help from Evahboost, Maguire

-----Original Message-----
From: James Murray (QA/EMC) <james.murray at ericsson.com>
To: s-car-list at audifans.com; 'dooksniffer at comcast.net' 
<dooksniffer at comcast.net>
Sent: Fri, 10 Jun 2005 16:08:28 -0500
Subject: RE: [s-cars] wastegate cap removal

   Rubber mallet and a nice wack?

/Jamu.

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com]
Sent: Friday, June 10, 2005 5:04 PM
To: s-car-list at audifans.com
Subject: [s-cars] wastegate cap removal


If one removes the six 8mm nuts securing the cover in place, would one 
then be
able to remove said cap?  Mine will not budge.  The cap over the 
adjustment bolt
is still intact and I am not planning on removing it.  Any idears would 
be well
received.

TIA
Ron Whiton
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list