[s-cars] Removing Timing Belt Cover

[Tony Curran]

Update. Managed to remove the timing belt cover by just pinning back the
tensioner, did not have to remove it. Now for the cam sprocket. Need a
tool...

Tony
96 S6

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com]On Behalf Of Tony Curran
Sent: June 17, 2005 9:05 PM
To: Fred Munro; James Murray (QA/EMC); S-Car-List at Audifans.Com
Subject: RE: [s-cars] Removing Timing Belt Cover


Thanks. I'll start taking it apart tomorrow.

TOny
96 S6

-----Original Message-----
From: Fred Munro [mailto:munrof at sympatico.ca]
Sent: June 17, 2005 8:47 PM
To: Tony Curran; James Murray (QA/EMC); S-Car-List at Audifans.Com
Subject: RE: [s-cars] Removing Timing Belt Cover


Tony;

To remove the T-belt cover you have to release the two clips and remove the
serpentine belt tensioner. To get at the CPS you'll have to remove the cam
pulley and the backing plate for the t-belt cover if I remember correctly.

HTH

Fred Munro
'94 S4


-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com]On Behalf Of Tony Curran
Sent: June 17, 2005 7:20 PM
To: James Murray (QA/EMC); S-Car-List at Audifans.Com
Subject: RE: [s-cars] Removing Timing Belt Cover


RE: [s-cars] Removing Timing Belt CoverThanks James. I plan to remvoe the
CPS to check the wiring for breaks. Do I have to remove the tensioner?

I'll look for another clip.

Tony
96 S6
  -----Original Message-----
  From: James Murray (QA/EMC) [mailto:james.murray at ericsson.com]
  Sent: June 17, 2005 7:04 PM
  To: S-Car-List at Audifans.Com; 'tony.curran at sympatico.ca'
  Subject: RE: [s-cars] Removing Timing Belt Cover


  Tony, I remember having problems with this too... if I remember correctly
there is more than two clips, look farther down on the left hand side...
that or it's something to do with the way it fits into the bottom cover
(memory is foggy). In any case it was much easier to remove once I started
taking off all the parts to get to the belts...

  Unless you plan to replace the CPS, you won't get much benifit from
removing the cover. The wire snakes behind the cam sprocket into the CPS,
the connector is on the outside next to the first injector.

  /Jamu.

  -----Original Message-----
  From: s-car-list-bounces at audifans.com
  [mailto:s-car-list-bounces at audifans.com]
  Sent: Friday, June 17, 2005 6:43 PM
  To: S-Car-List at Audifans.Com
  Subject: [s-cars] Removing Timing Belt Cover



  Getting around to check out the wiring of the CPS and can not remove the
  timing belt cover. I release the two clips but cover only comes out about
an
  inch before jamming.

  Is there a knack to removing this?

  TIA

  Tony
  96 S6

  _______________________________________________
  S-CAR-List mailing list
  S-CAR-List at audifans.com
  http://www.audifans.com/mailman/listinfo/s-car-list
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list