[s-cars] Code 2111 - what does it mean?

[chris chambers]

Actually by removing the fuse my understanding is you would erase any
error codes. Found the info here: 

http://www.sjmautotechnik.com/trouble_shooting/ecuf20v.html#fctera


"SJM Autotechnik: Erasing Fault Codes: 
1992-1996 S4/S6 with AAN 5 cylinder 20V Turbo engine 
In the early S4's, Fuse S26 (5 Amp) supplies power to pin 18 of the
Motronic ECU for maintaining the fault code memory. You can remove this
fuse S26 for a minute or so to erase any stored fault codes. This will
also erase any learned ignition timing or adaptive fuel mixture values
in the ECU. 
This fuse is located above the Motronic ECU which is located underneath
the passenger side floor carpet at the front of the footwell area. In
the early S4's, there are two circuit breakers on the left, the 5 Amp
fuse to the right, then one more circuit breaker to the right of the
fuse. 
The Carpet may need to be sliced up the left seam with a razor blade,
to allow it to be pulled back. The black lower door threshold plastic
trim should be removed first, then the right side kick panel before
trying to pull back the carpet. 
It is a pain to get at the Motronic ECU the first time, but gets easier
with practice. After pulling back the carpet, there is a black plastic
cover over the Motronic ECU and the fuse/circuit breakers. There are
two screws that should be removed to get this black cover off. Here is
a photo with the carpet pulled back, and the top black plastic cover
removed."


I'm sure someone will chime in and correct me if I'm wrong.


Bologona?
Banish boy (pizzo)?
Hap?
anybody? :-)

Clock starts now let's see who's quickest

Chris


> 2111 in volatile memory, cleaning wouldn't help if I understand
> correctly...
> 
> 
> 


AUDI - Accelerates Under Demonic Influence.


		
____________________________________________________ 
Yahoo! Sports 
Rekindle the Rivalries. Sign up for Fantasy Football 
http://football.fantasysports.yahoo.com