[s-cars] rs2 comp?

[James Bufkin]

Its an RS2, but the compressor housing could have been machined to accept 
the RS2 comp wheel.   The only way to really be sure is to measure the base 
diameter of the compressor wheel.  If its 2.6" its RS2, if its 2.7" its RS2 
comp.   The top diameter of both is the same.

If you take the housing off, be EXTREMELY careful not to skew the cover 
cause it'll damage the compressor housing.

James

>I bought an rs2 turbo from ebay - and the seller told that it's definately
>the rs2 competition -
>as I am not interested in opening the compressor side, i can give some
>specs I found just to look at the turbo (the ? sign is for the numbers
>which is hardly to see):
>
>Hotside numbers: 5326 101 79(73?) 88(86?)
>1462(1482?)
>3552
>
>Coldside: 5326 101 5160
>aprox 4.8cm (1.9") for the inlet that goes to the airbox (that would be the
>top diameter for the compressor wheel too I guess)
>So - what animal is this guys?
>
>--------------------------------------------------------------------
>mail2web - Check your email from the web at
>http://mail2web.com/ .
>
>
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list

James E. Bufkin, P.E.
Bufkin Design and Engineering, inc.
2309 West 8th Street
Austin, Texas 78703
512-236-8070
fax 512-480-5927