[s-cars] Wastegate to Frequency Valve hose

Mark Pollan mark.pollan at mci.com
Tue Mar 15 15:18:01 EST 2005


How about Spokane House of Hose?  Recall they just rebuilt my high pressure
hose and I am but one of several very satisfied listers/customers.  Ring 'em
up and talk to Jay.  He is to whom I was directed but prolly everybody there
is equally as pleasant and responsive.

http://www.spokanehose.com/


-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Sean Douglas
Sent: Tuesday, March 15, 2005 11:09 AM
To: 'Tom Green'; s-car-list at audifans.com
Subject: RE: [s-cars] Wastegate to Frequency Valve hose

I looked onto this too as you are right, that's one expensive piece of
rubber. The hose is moulded and runs directly over the turbo takes a
bend then down to the WGFV. The last bend is almost 180 degrees and is a
tight radius. This is where you might run into trouble with a straight
hose and it may kink.

I suppose you could arrange a straight hose without such a tight bend
radius, but it would not follow the original path.

This silicone hose is rated up to 350F and is sold in 10 ft min length;

http://paragonperformance.com/Silicone%20hose.html

For $27, its worth a shot.

Sean Douglas
1997 Audi S6//RS2-spec
1990 Audi 90 quattro 20v


> -----Original Message-----
> From: s-car-list-bounces at audifans.com 
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of Tom Green
> Sent: Tuesday, March 15, 2005 6:53 AM
> To: s-car-list at audifans.com
> Subject: [s-cars] Wastegate to Frequency Valve hose
> 
> 
> The vacuum hose between the wastegate and the frequency valve must be 
> pretty special stuff.
> I know it is a high heat hose, but the dealer list of $140 is still a 
> bit lofty IMO. Part # 034 145 742E.
> Does anyone have any specifications for this hose and  perhaps 
> alternatives.  Although this hose
> is formed to the routing it takes, I think a straight hose could 
> perform as well.  I plan to check the
> local hose supplier for a generic silicone hose.   The OEM hose 
> exhibits evidence of a hungry
> rodent since the hole is in a place not subject to rubbing against 
> anything else, although there
> is no forensic evidence available and no other damage.
> 
> Tom  '95 S6
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com 
> http://www.audifans.com/mailman/listinfo/s-> car-list
> 

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list



More information about the S-CAR-List mailing list