[s-cars] Centerforce dual friction clutch? New flywheel?

[Trevor Frank]

http://www.specclutch.com/specMain.html

They sell the pressure plate, clutch and aluminum flywheel all at the
same place.  They are also one of the only places in the country that
has the proper equipment to resurface our dual mass flywheels.  If you
want to support another audi nut, Javad is a dealer for them.
www.034efi.com

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Cody Payne
Sent: Wednesday, March 16, 2005 12:06 PM
To: Bill Clancy; Gabriel Caldwell; s-car-list
Subject: RE: [s-cars] Centerforce dual friction clutch? New flywheel?

Bill,
	Assuming the condition of the stock Dual mass FW is not too
worn/grooved or has not had to much charred clutch material transferred
to the FW surface it is possible to reuse.  I sourced my FW from
Autosport Werks who I believe gets it from another vendor.  I am sure
one of the listers can suggest a source that is available from the
Internet.


Cody

-----Original Message-----
From: Bill Clancy [mailto:clancybill at yahoo.com]
Sent: Wednesday, March 16, 2005 1:00 PM
To: Cody Payne; Gabriel Caldwell; s-car-list
Subject: Re: [s-cars] Centerforce dual friction clutch? New flywheel?


Hmmm...
I had my clutch replaced with an OEM a few years back.    The mechanic
didn't mention the flywheel.   Was it not resurfaced?

As for the LWFW, is there one that is recommended?    I need to do the
clutch again and I'd like an upgrade.

thanks,
-Bill


----- Original Message -----
From: "Cody Payne" <cpayne at bconnected.com>
To: "Gabriel Caldwell" <gabriel at ts.bc.ca>; "s-car-list"
<s-car-list at www.audifans.com>
Sent: Wednesday, March 16, 2005 11:54 AM
Subject: RE: [s-cars] Centerforce dual friction clutch? New flywheel?


Gabriel,
Typically when you replace a clutch on an older car you
resurface the flywheel.  Since our cars have a Dual-Mass flywheel they
are not resurfaceable typically and thus need to be replaced w/ NEW OEM.
The cost difference from NEW OEM and a 12lb Alum FW is around 75 to 100
bucks.

Cheers

Cody

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Gabriel Caldwell
Sent: Wednesday, March 16, 2005 11:40 AM
To: s-car-list
Subject: [s-cars] Centerforce dual friction clutch? New flywheel?


Does using the Centerforce dual friction clutch kit require you to get a
new flywheel, or can you use the stock dual mass unit?



Gabriel Caldwell
Tsunami Solutions Ltd.
#202 - 2055 Boundary Road
Vancouver, BC Canada V5M 3Z1
voice: 604.299.5855
fax: 604.648.8158
e-mail: gabriel at ts.bc.ca <mailto:gabriel at ts.bc.ca>
url: www.tsunamisolutionsltd.com <http://www.tsunamisolutionsltd.com>





_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list

=======
Notice: This e-mail message, together with any attachments, contains
information of Symyx Technologies, Inc. that may be confidential,
proprietary, copyrighted, privileged and/or protected work product,
and is meant solely for the intended recipient. If you are not the
intended recipient, and have received this message in error, please
contact the sender immediately, permanently delete the original and
any copies of this email and any attachments thereto.