[s-cars] ABS fuse pulled- Brake bias/proportion gone?

[calvinlc at earthlink.net]

I had a similar problem on my '89 200.  The stupid sensor had just backed
out a little bit.  I just tapped it back in gently with a hammer and all was
well.  If you can put an o-scope on the signals coming into the ABS computer
you will see a weak signal level from one that is backed out.  As far as
turning off the ABS, the later S-Cars don't have the ABS off switch that my
'92 has?  I guess this was one difference that had escaped me....now that I
think about it, though, when they went to EDL in '95 they probably deleted
the ABS on/off switch???
--Calvin


-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com]On Behalf Of steadi at comcast.net
Sent: Monday, May 30, 2005 11:13 PM
To: Nic Bode
Cc: S- Car List
Subject: Re: [s-cars] ABS fuse pulled- Brake bias/proportion gone?


The Squeal has nothing to do with the ABS intervention.

What you are experiencing is either A Sensor depth issue or a dead
sensor/break in the wire. Try new sensor if the wires buzz out.

Eric Fletcher
'00 S4tt
RS4 K04 Turbo Conversion
RS4 Intake and Fuel
RS4 intercoolers
RS4 Downpipes/modded for flow
Miltek Exhaust
RS4 Flywheel/Clutch and Pressure plate
Penske Suspension 800/900
Stoptech 332 fronts Stasis 298 rear Brakes
Abt Z6 18x8 Wheels
Euro Headlights
and all sorts of other toys...

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list